Case 4490 articulator w/ 4743hrs, 12spd trans, 3 position steering, 3 remotes, 3pt, small 1000pto, 20.8-34 tires, one owner
Case 2670 tractor w/ 2850hrs, 12spd trans, 2 remotes, 3pt, small 1000pto, 23.1-30 tires
CIH 7250 Magnum tractor w/ 18sp power shift trans, 4wd, 3 remotes, 3pt, large/small 1000pto, 18.4R42 rear axle duals, 380/85R30 front rubber, 22 front weights, nice
JD 2940 tractor w/ Allied 595 loader, 6594hrs, 4spd w/ hi/low, 2 remotes, 3pt, 540pto, 16.9-38 rear rubber, 84” bucket, forks
International 1206 tractor w/ 6477hrs, 8spd trans, TA, diesel, 2 remotes, 540/1000pto, 24.3-32 tires, tire chains
Bobcat S185 skid loader w/ 6275hrs, EROPS w/ heat/air, pilot controls, foot throttle, hyd quick att, aux hyd,10-16.5 tires
1998 Blant Hydro-Ax 721E w/ 4684hrs, 2spd hydro, 28L-26 tires, 20” tree sheer, JRB coupler
Hydro-Ax stump grinder, JRB coupler
Hydro-Ax 8′ rotary axe w/ JRB coupler, new blade (up to 6” trees)
White 24′ disc w/ scraper kit, 19.5” blades, extra parts
Glencoe 9 shank chisel plow w/ spring front disc, 3” shovels
White 435 12 shank chisel plow w/ front spring disc
JD 18′ drag w/ hyd raise/lower, manual fold
CIH 5 bottom plow w/ side hill hitch, spring reset
Kewanee 15′ cultimulcher w/ front and rear packers
JD 7000 6 row planter w/ dry fert, ground drive, 1.5 bu hoppers, row markers
CIH 5100 12′ grain drill w/ 7.5” spacing, grass seed box, single disc openers
NH 570 small square baler w/ 5′ pickup, string tie, thrower, 540pto, one owner
NH merger w/ 5′ pickup, flip down belt
H&S 11′ rotary rake w/ side curtain, 540pto
NH 163 4 star tedder w/ hyd fold, raise and lower, 540pto
8’x18′ Metal rack wagon w/ Kory 6278 tandem axle gear
9’x18′ Metal rack wagon w/ tandem axle gear, wooden floor
9’x20′ Metal rack wagon w/ Korey 6278 tandem axle gear, wooden floor
40′ Bale elevator w/ 2HP motor
2016 Kuhn FC4060 discbine w/ 13′ cut, center pivot, draw bar hitch, rubber rolls, small 1000pto, very little use
NH FP230 chopper w/ metal alert, kernel processor, walking tandems, small 1000pto, 11L15 tires
NH 360 3 row corn head
NH 27P 6′ hay head
2- H&S 16′ forage wagon w/ 20” unload conveyor, 3 beater, 540pto
2- H&S HD 16′ forage wagon w/ twin auger unload, 3 bearer, tandem axle gear, 540pto
NH 355 grinder mixer w/ 5”x13′ unload auger, 8”x8′ load auger, scales, 540pto
CIH 600 forage blower w/ auger feed, 540pto
Val Metal 530 Super Cart feed cart w/ Honda 6.5HP engine
Roto-Mix 354-12B Forage Express stationary feed mixer w/ Digi-Star EZ2000 scales
16”x18′ Paddle conveyor w/ incline (for loading feed cart)
18”x40′ belt conveyor
Val Metal bedding chopper w/ Honda GX390 motor
Kuhn Knight 8118 side slinger manure spreader w/ walking tandems, 16.5-16.1 tires, small 1000pto, road lights
CIH 1460 combine w/ 4784hrs, 4wd, 3spd hydro, 30.5L-32 front rubber, 16.9-24 rear rubber, missing side shield and chaff spreader
Killbros 350 gravity wagon w/ 6”x13′ auger
EZ Trail 3400 gravity wagon w/ 12.5-15 tires
Hutchinson 8”x50′ transport auger w/ 540pto
Korey 8278 running gear w/ 9.00-20 truck tires, 8 bolt rims
McCurdy G8 11′ running gear
78”x12′ Single axle trailer w/ fold down tailgate
275Gal Waste oil tank
Unused 3000gal poly upright tank w/ 2- 4” outlets, sight glass
150gal Metal fuel tank w/ hand pump
150gal Upright fuel tank w/ Fill-rite 110v pump
150gal fuel tank w/ 110v pump
Coats 40/40 tire machine
Coats 40-405A automobile tire changer
16.5-16.1 Flotation tires w/ 8 bolt rims
2- Mack truck hoods
58”x58” Metal cupola
5 Wagon hitches
3- Hand feed carts
Mueller 1300gal milk tank w/ 2” outlet agitator, SN: 68026A-05J
Mueller single phase compressor
Mueller Model D 120gal fre-heater
2- AO Smith 80gal water heaters
Delaval 10HP 3ph vacuum pump
Val Metal milker cart
300′ of 2” pipeline, Surge milk receiver group and Surge automatic pipeline washer and wash vat, set up for 10 milker units
9- Surge milker units w/ pulsators
Patz gutter cleaner w/ 5HP motor and 300′ of 16” gutter cleaner chain
Patz gutter cleaner w/ Baldor 3HP single phase motor, approx 200′ of 14” gutter chain
11- 44” calf pens w/ poly dividers
Allied 22”x128′ peak mounted hay elevator
Schuld 9′ diameter welded steel grain bin w/ flail and 6” unload auger
2- Silos– 18’x50′ and 24’x70′
ALL ITEMS SELL AS IS WHERE IS
Internet Premium: 3% across the board for everything bought online
Buyers Premium: 0% Buyer’s premium $1,001 and over. 10% Buyer’s premium $1000 and under.
Participation Requirements: Valid Credit Card required for bidding approval
Payment Options: Cash, check, card, wire transfer, or ACH
Payment Instructions:
- As soon as the auctioneer announces "sold", the buyer with the highest bid then becomes the full & rightful owner & it becomes his full responsibly. J Martin Auctions LLC has a right to accept or reject any and all bids due to any reasons. We are not responsible for any missed bids. We are not responsible for any damage to the item before or after it has been sold.
- All items sell as is, where is. J Martin Auctions LLC & all its employees make every effort to describe eq accurately, but we are not responsible for any errors or misrepresentations made by employees or seller. It is my responsibility, as the buyer, to inspect any and all eq for auction prior to purchase.
- I, as the buyer, verify that I have inspected all items that I am purchasing, or that I have waived my opportunity to inspect items prior to purchase.
- I agree to hold J Martin Auctions LLC harmless from and against all claims, liabilities, costs, and expenses, including legal fees, relating to the condition or use of articles purchased or failure of user to follow instructions, warnings, or recommendations of the manufacturer.
- There is no warranty or merchantability on any and all items expressed or implied, by auctioneer, employee, or seller.
- J Martin Auctions LLC cannot verify that any hours or years on listed equipment are verified or correct.
- J Martin Auctions LLC is not responsible for used or new equipment sold without the original owners’ manual or safety eq. Equipment purchased may not incorporate approved activating mechanisms of operation safety devices. It is the buyer’s responsibility that articles purchased are so equipped and safeguard to any and all requirements before placing in operation.
- Purchases will not be released until the invoice is paid in full.
- We accept cash, check, credit card, & wire transfer as payment. 3.5% Credit card convenience fee. $25 wire transfer fee. Out-of-state checks must have a bank letter of guarantee if over $100,000. $50 title handling fee for every titled item (reg or title).
- 8% County/State Sales tax will be charged on invoice total unless an acceptable sales tax exemption form is filed or is a titled vehicle or trailer going out of state.
- There is a 5day removal on all items unless special arrangements have been made. After 5 days, J Martin Auctions LLC will consider the item abandoned and the item will become property of J Martin Auctions. All small items need to be picked up the day of or within 2 business days after the auction. Any small item that goes missing after the auction J Martin Auctions is not responsible and will not be refunding your money.
There is a $50 fee per item that needs to be palletized
J Martin Auctions will ping the card that you enter at the time of registration to verify that it is valid and has funds in the card. The ping amount will be $200. (this charge will fall off your card w/ in 5 days)
If you fail to satisfy the terms of the auctions, J Martin Auctions is authorized to collect the total of your invoice on the credit card you entered at the time of sign up. If your purchases are under $1,000 and no payment arrangements have been made within 3 days, we are authorized to charge your card for your invoice total. Should your invoice total over $1000, J Martin Auctions will collect $1000 within three days with no confirmation of payment, & the remaining invoice total will be charged by 5 business days.
J Martin Auctions is authorized to sell purchased items with no payment at auction time or any auction or private treaty to collect funds for payment. All money collected will go towards item and storage fees.
Currency Type: USD
Shipping Instructions: The buyer is responsible for all shipping/trucking for their purchased items.
Preview Date & Times: Items can be previewed at the auction address from 3 days before the auction to the day before the auction
Checkout Date & Times: Please contact the auction company for checkout dates & times.
Main Office: 1036 New York 318, Waterloo, NY 13165
Further terms
- By making a bid, Bidder accepts the terms and conditions & payment, and removal terms and will be bound by them.
- Auction Catalog is guide-only. J Martin Auctions LLC reserves the right to group lots, reduce or add quantity to lots, add lots, or delete lots.
- Announcements made the day of the sale take precedence over written or advertised announcements- but do not alter, in any way, the terms and conditions of the sale.
- By agreeing and/or signing to these listed terms of the auction you are held to them, and they cannot be altered in any way unless by written notice from J Martin Auctions LLC signed by President or Business Manager.
Account user is responsible for all bids placed- whether intentional or unintentional & is responsible for all users on his account. After a bid is placed, it is non-refundable.
- The record of sales kept by the auctioneer and clerk will be taken as final.
- J Martin Auctions is not responsible for any discrepancies and/or internet shortage by the online program. The online bidding program is just a offered service and is in no way guaranteed to be accurate, working, & correct.
- Please contact J Martin Auctions LLC at 315.856.8447 or info@jmartinauctions.com with any questions.
