Redman Construction Inc Equipment Dispersal

Join us for this complete construction company auction! After many years in the construction industry Scott Arend of Redman Construction has decided to retire and disperse of his construction business. Equipment has been well maintained and serviced regularly. Bid with confidence!
Live and In-person

2024 JD 60G excavator 187hrs, cab w/ heat/ air, 2spd, 16” rubber tracks, 78” front blade, hyd thumb, aux hyd, 24” digging bucket, 40” ditching bucket, SN: 1FF060GXPPJ297398
JD 85G excavator w/ 3277hrs, cab w/ AC, radio, 2spd, Yanmar E6921 eng,  hyd thumb, 18″ wide rubber tracks, 86″ blade, Dromone Tag hyd quick coupler, 48″ bucket, SN: 1FF085GXPMJ022421A
JD 200LC excavator w/ 2176hrs, cab AC, 32″ tracks, 40″ W tooth bucket w/ 18″ pin coupler, 30″ thumb, SN: FF02GOOX30020A
Cat 336DL excavator w/ 16867hrs, cab AC, 2spd, 32″ track, 72″ cat tooth bucket w/ 20″ hyd pin coupler, SN: CAT0336DJW3K00324
Cat 312DL excavator w/ 11123hrs, cab ac, radio, 28″ steel tracks, 36″ tooth bucket, w/ 16″ pin coupler w/ Cat C4.4 Acert eng, SN: CAT03120TXGK0026
Deere 624K wheel loader w/ 5217hrs, cab ac, hyd aux, 20.5R25 tires w/ JRB coupler, 3.5 cu yd 8′ 10″ bucket, SN: 1DW624KZTHF682687
Deere 450H LGP dozer w/ 8675hrs, 24″ steel track w/ 10′ 6 way blade, OROPS, SN: T0450HX93309
2018 Bobcat T870 skid loader w/ 4071hrs, joysticks, cab AC, Deluxe display, w/ 80″ bucket hyd quick attach, 2spd, 17 1/2″ wide tracks, SN:B47C12294
Volvo SK-1000 TF roller w/1052hrs, 7′ front smooth roller vibrator, 4cylinder diesel eng, 23.1-26 tires w/ tooth roller mount SN: 189917
Hamm 3410 vibratory compactor w/4861hrs w/ Deutz 4 cylinder eng, 7′ front smooth roller, 23.1-26 tires, SN: H1791298
2011 Case 580 Super N extent backhoe w/ 5771hrs, 4×4, ride control cab w/ air, 84″ 3 in 1 bucket, 24″ hoe bucket, 14″ pin coupler, SN: JJGN58SNCBC542003
Bobcat 811 skid mount backhoe att w/ 12” bucket
Terex RL4 light tower w/ Kubota D1105-BG-EF01 eng, SN: RL414-10318
IH 5488 tractor w/ 7209hrs, 18spd power quad, 2 remotes, w/ Faster hyd splitter, 1000pto, 3pt, 2wd, 20.8-38 rear duals, 14L-16.1 front tires, SN: 2590002H001567
Ford tractor w/ 851hrs, 8spd trans, 1 remote, 3pt, 540pto, w/ Ford 335 loader, 68″ bucket, 2wd, 16.9-24 rear wheels
2020 Kenworth dump box, walking beam rear axle, w/ 11R24.5 rear tires, electric tarp, 425/65R22.5 front tires, Cummins X15 eng, SN: 3BKDX4TX2LF360170
1998 Freightliner  w/ 664147mi, 18spd trans, cab ac, axle dif, fifth wheel slide, 6066hrs, hyd pto, 3rd axle lift, air ride, Cat eng, 11R24.5 tires, VIN : 1FUGFXZB4WL952381
1990 Peterbilt truck w/ 59,424mi, 3984hrs, 8spd trans, dif-lock axle w/ water tank w/ Cat water pump w/ 2215hrs, 11R22.5 tires
Cat D25oE off road truck w/ 18602hrs, 4spd, cab ac, dif-lock w/ Cat 3306 eng, 23.5R25 tires
Cat D250E off road truck w/ 13755hrs, 3spd, cab ac, dif-lock, 23.5R25 tires, SN: 4P50013
2021 Muv-All 53′ 35 ton triaxle lowboy w/ alum pull out ramps, front and rear deck, manual disconnect, light package
Kaufman 53′ lowboy trailer 26′ well, Triple axle w/ air ride, 8 1/2′ wide, hyd attach, SN: 1K9FR4334JB367381
10’x5′ tandem axle trailer w/ 250gal tank w/ vacuum pump w/ Kohler Command 25 eng, septic pump system
2’x8′ mulching wagon w/ Detroit diesel engine, Reinco mulching blower, 4 1/2′ sides,  11L-15SL tires
Allstar 26′ x 8′ mobile office w/ 2 AC units
1999 Polaris Ranger 6×6 UTV 713hrs, 3 1/2 x 5′ bed, SN: 4XARF50A7XD211301
Lincoln electric ranger 8 w/ 548hrs, w/ Onan Performance eng
22′ drag w/ hyd raise
Case 13′ disc 24″ blades, SN: 1608987
12′ Brillion cultimulcher w/ 12″ packer wheels
11 Gang chisel plow w/ one missing gang Ford 138 SN: 10LC0014
60” x 11′  pull behind roller
Land Pride 700 spreader w/ 3pt, 1 remote, 540pto
Haybuster 2564 hay shredder w/ 1000pto, controls, SN: 2515126764
1170cu ft  storage container 20′ long
12’x5’x3′ deep steel containment holder for fuel tank
8 1/2′ x 5’x2′ deep steel containment holder for fuel tank
13 1/2’x5’x2′ deep steel containment holder  w/ 1000gal fuel tank w/ Fill-Rite 35GPM fuel pump (off road diesel)
1000Gal fuel tank w/ Fill-Rite FR319VBP fuel pump w/ 12 1/2′ x 6′ x 2′ deep steel containment holder (off road diesel)
1000Gal off road fuel tank w/ Fill-Rite 20gpm pump w/ 13′ x 4 1/2′ x 2′ deep containment holder
500Gal off road fuel tank  w/ Fill-Rite 20gpm pump w/ 6′ x 5′ x 3′ deep built on containment holder
Better built HD 100gal steel t shaped transfer tank w/ Fill-Rite 15GPM 12 volt pump, SN: AI011791
Rex 1000gal stainless tank
200gal Tank w/ GPI hand pump
105Gal off road diesel tank w/ GPI pump and hose reel
100Gal steel fuel tank w/ GPI M-3025 w/ hose reel
105Gal L fuel tank w/ Fill-Rite 15GPM fuel tank
Godwin CD100M Dri-Prime  pump w/ 8129hrs w/ Yanmar 3TNV88, BDSAT eng, w/ CD100MBS pump SN: 9921162-37
Godwin HS-100 hyd pump system w/ 3021hrs, w Yanmar 3TNE88-EDN, SN: 01187321
Pallet of 40 Peak Kleen Def 2.5gal containers
55Gal drum of def w/ Blue Energy pump
Asbury 9′ bucket 521/621D w/ hyd side swing, JRB payloader coupler
Cat 72” x 45″ high bucket w/ 20″ pin coupler
Trojan 72″ bucket w/ 20″ excavator pin coupler
Cat 72″bucket w/ 20″ pin coupler
Cat 72″ excavator bucket w/ 20″ pin coupler
Cat 66″ tooth bucket w/ 20″ excavator pin coupler
Sec  65″ ditching bucket w/ 16″ pin coupler for excavator
Cat 60″tooth bucket w/ 18″ pin coupler
Geith 60″ ditching bucket w/ 16″ pin coupler
Cat 54″ excavator ditching bucket w/ 12″ pin coupler
WB 3MNDCG48 48″ backhoe bucket w/  14″ pin coupler
Cat 35″tooth bucket w/ 20″ pin coupler
Rockland  30″ tooth bucket w/ 20″ pin coupler
24″  Tooth bucket w/ 16″ pin coupler
Tag 23″tooth bucket w/ 12″ pin coupler
Catb tooth bucket w/ 20″ pin coupler
Fleco  18″ tooth bucket w/ 16″ pin coupler
Case 18″ backhoe bucket w/ 14″ pin coupler
Cat  16″ tooth bucket w/ 12″ pin coupler
Skid mount 90″ snow blade w/ hyd angle
Western 72″ truck snow plow
JD 60” compact mount snow blower
JRB 10′ sweepster w/ water sprayer, JRB payloader coupler
Solemes weld on 30″ excavator thumb
Rockland EGH314C LCR 33″ excavator grabber w/ 16″ pin coupler
Paladin 10047-0737 60″ W 48″ pallet forks w/ 48″ coupler
Paladin Case 621 60” forks w/ JRB payloader coupler
84″ Bobcat angle broom w/ hyd swivel SN: 231413486
9 1/2′ x 2′  tooth ripper for bulldozer w/ 50″ mount
Cat  18′ JRB payloader mount Jib crane
72″ x 60″  skid mount platform
2020 Ultramix MMX 858HS concrete mixer w/ Honda GX240 eng SN: 407005672
Toro 68004 concrete mixer w/ Honda GX240 eng, SN: 40045878
Concrete mixer w/ 3′ concrete drum, Kohler eng
Wacker Neuson reversible plate compactor, Hatz1PD815 eng, w/ 292 hrs
Wacker Neuson DPU5545HEHUS reversible compactor, Hatz ID425 eng, 276 hrs
Toro 68026 reversible compactor w/ Honda GX160 eng, SN: 31300230
34″ x 27″ excavator mount compactor, 14″ pin coupler
30″ x 24″ excavator mount compactor, 12″ pin coupler
Bomag RC compactor w/  34″ double drum, Kubota D1005-ET06 diesel eng
Wacker RC double roller compactor w/ 937hrs, FOCS 3 cylinder eng
Wacker Neuson BS50-2 plate compactor rammer, SN: 20009685
Fitzsimmons hyd power system w/ Honda GX620 eng
Airman PDS 1855 air compressor w/ 144hrs, Nissan 526 diesel eng, jack hammer
Dewalt 4.5gal 200 psi air compressor
Air compressor w/ Honda 8HP eng
Wacker Neuson 3800 generator w/ Honda GX240 motor
Honda EB5000x generator
Wacker G5.6 generator w/ Honda 11.0HP eng
Hotsy HS3040G 4000psi hot pressure washer w/ Honda 8HP eng w/ 3654hrs
Shark hot water pressure washer w/ 740 hrs, Honda eng
Hypro DR30GRGI pressure washer pump w/Honda GX1605.5
Stihl TS420 demo saw
Stihl TS420 demo saw
Husqvarna K770 demo saw
Husqvarna K970 demo saw
Daxton 3Z989 9″x16″ band saw SN: 85420
Norton G-148-ABA Kohler 16HP eng concrete saw
Miller Miller-Matic 252 welder
Trimble SR300 laser receiver
Spectra Precision  laser w/ tripod SN:69301
Topcon RL-H4C laser head w/ Topcon LS-80L receiver
Spectra LL300 laser head w/ Spectra HR320
Site Pro TL20X laser head w/ plum lines
Topcon RL-SV25 laser head w/ ADIRpro LD-8 receiver
Radio detection RD385 Data Bore w/ RD385 Data view cable and pipe location system
Spectra Precision 1212 Data Bore, SN: 990121
Topcon LS-B4 laser receiver
14’x 10″ plastic pipe, lot of 9
14′ x 15″ plastic pipe, lot of 3
14′ x 8″ plastic pipe, lot of 19
8- 6″ plastic pipe 14′ long
20- 4″ plastic pipe 20′ long
40- 4″ plastic pipe 14′ long
Misc length of 8″ coverts (10′ to 20′ lengths)
Approx 14 Misc length of 12″ coverts (10′ to 20′ lengths)
Roll of 6″ slit tile line and roll of 4″ slit tile line
4″ PVC conduct misc lengths
5″ black conduits and 3″ black conduits misc lengths
Misc length 9″ and 6″ plastic pipe, 27-6″, 7- 9″
1- 42″ x 20′ long covert
2- 3′ x 20′  and 12′ long coverts
4- 2 1/2′ x 13′  and 15′ and 16′ long coverts and 20′ long
Misc 1 1/2 and 1′ 3″ and 12″ assorted lengths coverts
106″ x 106″ x 9′ trench wall stabilizer
4 1/2′ x 8′ x 20′  trench wall stabilizer
45″ x 8′ x 12′  trench stabilizer
45″ W 72″ H 120″ L Trench stabilizer
Smith Inn 34″x6’x10′  trench stabilizer
10- 30″, 20′  Concrete barriers
11′ x 6’x3′ bedding box
78″ x 4′ x 16′ bedding box
8′ x 14′ x 54″ bedding box
16′ x 8’x 1″ steel plates
3- 10′ x 5′ x 3/4″ steel plates
3/4″ x 8′ x 80″  steel plate
1″ x 12′ x 8′  steel plate
1″ x 12′ x 8′  steel plate
3/4″ x 11′ x 76″  steel plate
1 1/4″ x 10′ x 8′  steel plate
1/2″ x 8′ x 8′  steel plate
1/2″ x 8′ x 8′  steel plate
1″ x 10′ x 6′  steel plate
7/8″ x 8’x 6′  steel plate
Weather guard 70″x26″ truck bed toolbox
2- Weather guard 64″x16″x18″ dual door tool box
New Weather guard 19″x 18″x 72″ truck bed tool box
Tractor Supply 48″x19″x18″ truck bed tool box
70″ x 18″ truck bed tool box
Homak 54″ x 18″x18″ tool box
24″x24″x48″ tool box
Side mount tool box
3pt FMC bean pumping DP20-200 540pto sprayer w/ hose reel, SN: A281056
White outdoor 13HP/45″ snow blower w/ Tecumseh eng, SN: 1L215130050000006
Snap on tool cart w/ various tools
Engine  stand
Wheel dolly
Misc 
water pump hoses
Drain snake w/ cart
Misc fuel cans
8’x 4’x 1.5′ metal rack
Misc tarps
Reel of 3/8′ x 9″ hose
Lot of misc air hoses
Val 6 red oil heater w/ fuel barrel
Lot of misc water hoses
Misc steel ladders
Misc PVC fittings
Misc lumber
Misc tile line fittings
Misc metal pipe fittings
1.5″ x 5′  wooden stakes
Erosion control mats
Portable air tank
Acetylene torch w/ torch tanks
Air jack hammer
Misc hole saws
Misc bottle jacks
Misc power tools, circular saws grinders
Misc sockets
Misc jack stands
Floor jacks
10′ W, 3/8 thick
 plastic roll liner
Roll of 3 wire LPE 600V type use-2ph A wire
Misc road construction signs
Misc lot of concrete blankets
Lot of 4’x6′ t post fence posts
Lot of 6′ t post fence posts
Lot of 8 1/2″ x 4 1/2″ x 2 1/2″ bricks
29 1/2″ Wide roll of rubber mat
Misc lot  of PVC pipe couplers
Misc lot  of PVC pipe couplers
12″ Clow 2639 shut off valve
Lot of 12″ plastic fittings
6′ High shop step ladder on wheels
17-19 year Chevy Silverado 4×4 8′ truck bed, rubber lined
Misc wood  block
Lot of Misc plastic pipe fittings
Lot misc water hose
Homelite diaphragm pump w/  3″ inlet w/ Honda 163 eng
Lot of 3 water  sump pumps
Misc shut off handles and pipe accessories
2- Pipe lift movers
3- Instant canopy tent
Drain snake w/ holder cart
Pallet  of 48″ snow fence
90″ x 40″  alum step platform, 28″ high
4- Misc wheel barrels
2- Misc Marco sand blasters
Craftsman drill press
Moto part windmill
Pro-Tec hydraulic Shores cylinder HS-C-5288 52″ to 88″ w/ hyd hand pump w/ wooden sides
Misc stakes and concrete form holders
Concrete float
Misc 
cables, lifting cables, Yale chain hoist, ground shovels, tripod cable cane, roll of HD rope
Pallet Sakrete 80# 4000psi concrete mix ( approx 21 bags)
Pallet Amerimix 80# AMX4005 Mortar (21bags)
4.25 W x 10′ long concrete form bracings
Spool of 3/4″ rope
Kenco PL2000 2000# 13″ Max cylinder lifter
Misc ground stakes
Hyd cylinder crane hoist
Profile high performance mulch blend (30 bags)
Bosch RH328VC backhammer hammer drill w/ drill bits
9- Misc levels
Trimble Guided bull dozer blade mount GPS mounts
Misc tripods for lasers
General EP8 blower fan
Jet power hacksaw A26
Honda trash pump WT40X w/ 11HP Honda eng, 4″ in let
Stone trash pump w/ 4″ pipe w/ Kohler magnum 18HP eng
Goodwin GTF 80HX trash pump w/ Honda 270cm
Tsurumi pump EPT3-80HA trash pump w/ Honda 270 eng
Red Lion 617033  trash pump 150gpm w/ CMXX 179cc eng
Multiquip QP30ITH trash pump  w/ Honda GX240 eng
Wacker Neuson PD3 diaphragm pump 3 1/2″ in let w/ Honda GX120
8′ high 8′ wide sections pallet racking, 5 sections
Pallet of slab wood
Lot of misc steel cylinder stock
Red 54″ high x 6′ fence sections (approx 13 sections)
70″ black fence sections 48″ high
Lot of garden hose and air hose
Leica Piper200 350000BTU liquid fuel fired portable space heater
Misc nails and screws
Misc springs and equipment parts
Misc hose 1 1/2″, brake line air hose, misc wire

ALL ITEMS SELL AS IS WHERE IS

 

Internet Premium: 3% across the board for everything bought online
Buyers Premium: 5% Buyer’s premium $1,001 and over. 10% Buyer’s premium $1000 and under.
Participation Requirements: Valid Credit Card required for bidding approval
Payment Options: Cash, check, card, wire transfer, or ACH
Payment Instructions:

  1. As soon as the auctioneer announces "sold", the buyer with the highest bid then becomes the full & rightful owner & it becomes his full responsibly. J Martin Auctions LLC has a right to accept or reject any and all bids due to any reasons. We are not responsible for any missed bids. We are not responsible for any damage to the item before or after it has been sold.
  2. All items sell as is, where is. J Martin Auctions LLC & all its employees make every effort to describe eq accurately, but we are not responsible for any errors or misrepresentations made by employees or seller. It is my responsibility, as the buyer, to inspect any and all eq for auction prior to purchase.
  3. I, as the buyer, verify that I have inspected all items that I am purchasing, or that I have waived my opportunity to inspect items prior to purchase.
  4. I agree to hold J Martin Auctions LLC harmless from and against all claims, liabilities, costs, and expenses, including legal fees, relating to the condition or use of articles purchased or failure of user to follow instructions, warnings, or recommendations of the manufacturer.
  5. There is no warranty or merchantability on any and all items expressed or implied, by auctioneer, employee, or seller.
  6. J Martin Auctions LLC cannot verify that any hours or years on listed equipment are verified or correct.
  7. J Martin Auctions LLC is not responsible for used or new equipment sold without the original owners’ manual or safety eq. Equipment purchased may not incorporate approved activating mechanisms of operation safety devices. It is the buyer’s responsibility that articles purchased are so equipped and safeguard to any and all requirements before placing in operation.
  8. Purchases will not be released until the invoice is paid in full.
  9. We accept cash, check, credit card, & wire transfer as payment. 3.5% Credit card convenience fee. $25 wire transfer fee. Out-of-state checks must have a bank letter of guarantee if over $100,000. $50 title handling fee for every titled item (reg or title).
  10. 8% County/State Sales tax will be charged on invoice total unless an acceptable sales tax exemption form is filed or is a titled vehicle or trailer going out of state.
  11. There is a 5day removal on all items unless special arrangements have been made. After 5 days, J Martin Auctions LLC will consider the item abandoned and the item will become property of J Martin Auctions. All small items need to be picked up the day of or within 2 business days after the auction. Any small item that goes missing after the auction J Martin Auctions is not responsible and will not be refunding your money.
    There is a $50 fee per item that needs to be palletized

J Martin Auctions will ping the card that you enter at the time of registration to verify that it is valid and has funds in the card. The ping amount will be $200. (this charge will fall off your card w/ in 5 days)

If you fail to satisfy the terms of the auctions, J Martin Auctions is authorized to collect the total of your invoice on the credit card you entered at the time of sign up. If your purchases are under $1,000 and no payment arrangements have been made within 3 days, we are authorized to charge your card for your invoice total. Should your invoice total over $1000, J Martin Auctions will collect $1000 within three days with no confirmation of payment, & the remaining invoice total will be charged by 5 business days.
J Martin Auctions is authorized to sell purchased items with no payment at auction time or any auction or private treaty to collect funds for payment. All money collected will go towards item and storage fees.


Currency Type: USD
Shipping Instructions: The buyer is responsible for all shipping/trucking for their purchased items.
Preview Date & Times: Items can be previewed at the auction address from 3 days before the auction to the day before the auction
Checkout Date & Times: Please contact the auction company for checkout dates & times.
Main Office: 1036 New York 318, Waterloo, NY 13165
Further terms

  1. By making a bid, Bidder accepts the terms and conditions & payment, and removal terms and will be bound by them.
  2. Auction Catalog is guide-only. J Martin Auctions LLC reserves the right to group lots, reduce or add quantity to lots, add lots, or delete lots.
  3. Announcements made the day of the sale take precedence over written or advertised announcements- but do not alter, in any way, the terms and conditions of the sale.
  4. By agreeing and/or signing to these listed terms of the auction you are held to them, and they cannot be altered in any way unless by written notice from J Martin Auctions LLC signed by President or Business Manager.

Account user is responsible for all bids placed- whether intentional or unintentional & is responsible for all users on his account. After a bid is placed, it is non-refundable.

  1. The record of sales kept by the auctioneer and clerk will be taken as final.
  2. J Martin Auctions is not responsible for any discrepancies and/or internet shortage by the online program. The online bidding program is just a offered service and is in no way guaranteed to be accurate, working, & correct.
  3. Please contact J Martin Auctions LLC at 315.856.8447 or info@jmartinauctions.com with any questions.